< Back to Resources Hub

Oil and Gas Software: Types, Applications, Companies, and How to Choose

Published: · Updated:

CruxOCM oil and gas software article cover image.

Oil and gas software is the set of digital tools that companies use to find, produce, move, process, and sell oil, gas, and refined products. It ranges from seismic interpretation and reservoir simulation to pipeline control, refinery optimization, accounting, and cybersecurity for operational systems.

Most oil and gas companies do not run one system. They run dozens, from different vendors, built at different times, and many of them do not share data well. The result is that operators and engineers spend time moving information between tools instead of acting on it, and each new application adds integration work.

The answer is to choose software by the job it does and the layer it works in. Some tools record and report, some model and recommend, and some act on the physical process. Knowing which is which makes it clear where each product fits, what it needs to connect to, and where the gaps are.

This article explains what oil and gas software is, the main types by segment, how software applications fit together in the control room, the leading oil and gas software companies by category, the benefits, and how to choose the right solution.

What Is Oil and Gas Software?

Oil and gas software is specialized software that supports the technical, operational, and business work of the oil and gas value chain: upstream exploration and production, midstream transportation and storage, and downstream refining and distribution. It connects to sensors, control systems, and business systems to collect data, model the process, support decisions, and in some cases control equipment directly.

The market is large and growing. According to Apps Run The World, the global oil, gas, and chemicals software market reached $14 billion in 2024, a 9.5% increase over the previous year, with the top 10 vendors holding 49.5% of the market.

Oil and gas software is used by geologists, reservoir and process engineers, control room operators, maintenance teams, schedulers, accountants, and executives. Each group uses different applications, which is why integration is one of the main challenges in this industry.

Types of Oil and Gas Software by Segment

The types of oil and gas software follow the three segments of the industry, plus software that spans all of them.

SegmentWhat the segment doesMain software types
UpstreamFinds and produces oil and gasSeismic interpretation, reservoir simulation, drilling engineering, production optimization, production accounting
MidstreamGathers, processes, transports, and stores oil, gas, and NGLsSCADA, pipeline simulation and leak detection, scheduling and nominations, measurement, pipeline automation and optimization
DownstreamRefines crude and distributes productsRefinery process control and advanced process control, planning and scheduling, blending, terminal and distribution management
Cross-sectorSupports the business across segmentsERP, enterprise asset management, data platforms and historians, analytics, OT cybersecurity

Upstream oil and gas software

Upstream software supports exploration and production. Geoscience applications interpret seismic data and build subsurface models. Reservoir simulators predict how a field will produce under different development plans. Drilling software plans wells and monitors drilling parameters in real time. Production software tracks well performance, allocates volumes, and supports artificial lift and production optimization.

Midstream oil and gas software

Midstream software runs the movement and storage of hydrocarbons between the wellhead and the refinery or end user. SCADA systems collect field data and let operators issue commands from a central control room. Pipeline simulation and real-time transient models calculate hydraulics and support leak detection. Scheduling and nomination systems plan what moves where and when. Measurement and accounting systems track custody transfer volumes. Pipeline automation and optimization software calculates operating targets and, in the most advanced cases, executes control actions automatically. CruxOCM covers this segment in more depth in its article on specialized midstream software.

Downstream oil and gas software

Downstream software runs refineries and product distribution. Distributed control systems and advanced process control keep refinery units stable and near their constraints. Planning and scheduling tools decide which crudes to buy and which products to make. Blending software meets product specifications at the lowest cost. Terminal and distribution systems manage loading, inventory, and deliveries.

Cross-sector software

Cross-sector software supports the business across all segments. Enterprise resource planning (ERP) systems handle finance, procurement, and human resources. Enterprise asset management software plans maintenance and tracks equipment history. Data historians and data platforms store time-series operating data. Analytics tools turn that data into reports and models.

OT cybersecurity software

Operational technology (OT) cybersecurity software protects control systems, not only office IT. It includes network segmentation, asset inventory, anomaly detection for industrial protocols, and security monitoring. Because SCADA and DCS systems control physical equipment, a security failure can stop operations, which is why OT security is covered in more detail in CruxOCM's guide to industrial cybersecurity.

How Oil and Gas Software Applications Fit Together in the Control Room

Oil and gas software applications in operations sit in three layers. Understanding the layers explains why adding another dashboard rarely changes how an asset performs.

LayerWhat it doesTypical software
Data layerCollects real-time data from the field and passes operator commands to equipmentSCADA, DCS, historians
Optimization layerModels the system and calculates targets or recommendationsPipeline simulation, real-time transient models, optimization software
Execution layerActs on the targets in the physical process, measures the response, and adjustsPipeline automation software

Most oil and gas software stops at the first two layers. SCADA shows the operator what is happening. Simulation and optimization tools calculate the best operating targets. The operator still has to turn each recommendation into commands, by hand, while monitoring alarms and handling everything else on the shift. On many liquid pipelines, that means manual commands every one to 20 minutes.

Execution-layer software turns the recommendation into action. It reads live data, sends control actions through the existing SCADA system, measures how the pipeline responds, and adjusts on the next cycle. This feedback is what makes the control closed-loop, and it is the difference between software that advises and software that acts.

Oil and Gas Software Companies by Category

Oil and gas software companies range from global industrial automation vendors to specialists in a single segment. The table groups well-known vendors by the type of software they are best known for. It is a starting point for a shortlist, not a ranking.

Software categoryExample oil and gas software companies
Upstream geoscience and reservoirSLB, Halliburton (Landmark), CMG
Production and oilfield accountingQuorum Software, Enverus, W Energy Software
Control systems (SCADA, DCS)Emerson, Honeywell, ABB, Yokogawa, AVEVA
Pipeline simulation and leak detectionDNV (Synergi Pipeline Simulator), AVEVA, Emerson
Process simulation, APC, and optimizationAspenTech, AVEVA, Honeywell, Emerson
Pipeline automation (execution layer)CruxOCM
ERP and enterprise asset managementSAP, Oracle, IBM (Maximo)
OT cybersecurityDragos, Claroty, Nozomi Networks

Many large vendors cover several categories through acquisitions, so the same company can appear in more than one row. When comparing vendors, check which layer of the control room each product works in, and whether it only recommends or also acts.

Benefits of Oil and Gas Software

The benefits of oil and gas software depend on the layer it works in, but most come from better use of data and less manual work.

  • Higher throughput and asset utilization. Optimization and automation software keeps pipelines and process units closer to their capacity limits.
  • Lower operating costs. Energy optimization, predictive maintenance, and automated routine tasks reduce power, repair, and labor costs.
  • Safer, more stable operations. Continuous monitoring and control reduce process variability, alarms, and pressure excursions.
  • Better compliance. Automated data capture and reporting simplify regulatory reporting and audits.
  • Faster decisions. Real-time data and models give operators and managers current information instead of end-of-day reports.

Challenges of Oil and Gas Software

Oil and gas software solutions often deliver less than expected, and the reasons are usually the same across companies.

  • Data silos. Each application stores its own data in its own format. Engineers spend time exporting, reconciling, and re-entering information between tools, and different teams work from different numbers.
  • Legacy control systems. Many SCADA and DCS installations are decades old. Replacing them is expensive and risky, so new software has to work on top of them.
  • Data quality. Instruments drift, tags are poorly named, and gaps appear in historian data. Models and analytics built on that data inherit its errors.
  • Recommendations that are not acted on. Optimization tools produce targets, but operators already busy with alarms and manual commands cannot follow every recommendation, consistently, around the clock. The value stays on the screen.
  • Cybersecurity exposure. Every new connection into the OT environment is a potential attack path, so security reviews can slow or block deployment.
  • Custom engineering for every asset. When each deployment is built from scratch, the second and third assets cost nearly as much as the first, and programs stall after a pilot.

Each of these challenges points to a selection criterion in the next section.

How to Choose Oil and Gas Software

Choosing oil and gas software starts with the problem to solve and the layer where it sits, not with the feature list. Evaluate options against these criteria:

CriterionWhat to check
Problem and layerWhich problem the software solves, and whether it records, recommends, or acts
Segment fitProven deployments on the same type of asset, such as liquid pipelines, gathering systems, or refineries
IntegrationWhether it works on top of existing SCADA, DCS, and historians without replacing them
Data direction and securityWhether it runs inside the OT environment and keeps data flowing out of OT to IT, never from IT into OT, and holds independently audited certifications
Operator controlWhether operators can see what the software does, set its limits, and override or stop it
Deployment and scaleHow long the first deployment takes, and whether the second asset reuses the work from the first
Verified resultsPublished results with ranges, from comparable assets, and whether the vendor commits to outcomes contractually
SupportTraining, troubleshooting, and long-term support commitments

Oil and Gas Software for Pipeline Automation: CruxOCM

CruxOCM builds oil and gas software for the execution layer of midstream operations: liquid transmission pipelines, gathering systems, and the equipment that runs them. Its software runs on top of the existing SCADA system and does what recommendation tools leave to the operator: it acts.

pipeBOT™ is CruxOCM's closed-loop pipeline automation software. It reads real-time data, executes control actions, tracks the pipeline's response, and adjusts every 5 to 15 seconds. pipeBOT™ combines continuous control, such as setpoint adjustments, with discrete control, such as pump starts, stops, and swaps, in one system. All commands pass through SCADA and are logged on behalf of the operator, who keeps the authority to override or stop the system. CruxOCM reports up to 85% fewer manual commands, 50% fewer alarms, and 26% less pressure variability with pipeBOT™.

CruxOCM's other control applications divide into two groups. BOTs execute control: gatherBOT™ automates scheduling and delivery for gathering systems, and draBOT™ controls drag reducing agent injection skids. OPTs calculate targets for the BOTs to execute: maxOPT™ calculates targets for maximum throughput, for a 2 to 7% throughput increase; leanOPT™ calculates the minimum safe hydraulic profile, for 1 to 3% lower power costs; and powerOPT™ optimizes real-time energy consumption, for up to 10% lower power costs. All are built on physics-first models of the pipeline.

The Industrial Automation Hub (IAH™) deploys and manages these control applications through human-supervised AI agents, so a configuration validated on one asset becomes the starting point for the next.

Oil and Gas Software FAQ

These are the questions people most often ask about oil and gas software.

  • The software used in the oil and gas industry includes geoscience and reservoir simulation for upstream, SCADA, pipeline simulation, scheduling, and automation for midstream, process control and planning for downstream, and ERP, asset management, analytics, and OT cybersecurity across all segments.

Share this article

Get updates
when we publish.

Feedback
Oil and Gas Software: Types, Applications & Companies · CruxOCM